Select Page

config_test

Config Phone

WARNING! This page is meant to be used to configure phones. Improper use may render your phone inoperable.

There are two simple parts to this configuration. 1. Phone System Name and 2. Phone IP Address

Phone System Name
You must have sent the MAC ID of a Phone (eg. 00E08D84AC1) to Support. A configuration file needs to be created on the Phone System side. You will be advised when you can return to this page for configuration. You will also receive the Phone System Name (eg. psdomphone.domphone.com) to use below.

SPA942 or SPA504G IP Address
1. Hit Setup Key (button to the right of the number 6)
2. Press 9
3. Use the CurrentIP address (eg. 192.168.1.114)
4. Hit the cancel button twice to return

PAP2T or SPA112 IP Address
1. Plug a regular phone into the Line 1 jack
2. Pick up the phone and dial ****110#
3. A voice will speak the IP address of the PAP2T
4. Hang Up

SPA504G Configuration
Copy the Phone System Name and the Phone IP Address into the appropriate fields below.
Then press the config phone button. The phone will go through its configuration process in two parts.
Takes about 15 min if a new firmware upgrade is needed.

SPA942 Configuration
Copy the Phone System Name and the Phone IP Address into the appropriate fields below.
Then press the config phone button. The phone will go through its configuration process in two parts.
Takes about 2 min.

PAP2T or SPA112 Configuration
Copy the Phone System Name and the Phone IP Address into the appropriate fields below.
Then press the config phone button. If this is the first configuration then it will take two to three min to reboot.
If the Line 1 light doesn’t come on, the PAP2T/SPA112 may need to be unplugged from power and plugged in again.

<!-- [et_pb_line_break_holder] --> <div class="form"><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <form action="configphone.php" method="post" id="contactform"><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <ol><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <li class="buttons"><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <label for="type">Phone Type*</label><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <select id="phone_type" name="phone_type"><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <option>Choose One</option><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <option>SPA504G</option><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <option>SPA942</option><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <option>PAP2T</option><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <option>SPA112</option><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> </select><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> </li><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <li><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <label for="name">Phone System Name*</label><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <input id="phone_system" name="phone_system" class="text" /><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> </li><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <li><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <label for="email">Phone IP Address*</label><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <input id="phone_ip" name="phone_ip" class="text" /><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> </li><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <li class="buttons"><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> <input type="image" name="imageField" id="imageField" src="/images/configphone.jpg" /><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> </li><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> </ol><!-- [et_pb_line_break_holder] --><!-- [et_pb_line_break_holder] --> </form><!-- [et_pb_line_break_holder] -->